Most of the time, businesses will spend a lot of money to purchase their forklifts. It is vital, therefore to take proper care of your equipment to protect your investment into the long run. It is really a great idea to know the procedures which are carried out during maintaining and taking care of this equipment.
Among the best ways to tell how good the engine is working is by starting the forklift up and listening carefully to see how it works. Like for instance, if there are any knocks or misses, the machine is faulty and this should raise several issues. Additionally listen closely for any squealing sounds that come from the belts since these sounds will provide you with a wealth of information.
Some of the main components requiring attention during maintenance include the horn, safety warning devices, gauges, the overhead guard and the lights. Any faulty parts or burnt out light bulbs must be replaced as soon as they are noticed. It is also essential to inspect the wiring.
The battery compartment terminals should be cleaned after the above parts have been inspected thoroughly. If the terminals are not clean, be sure to clean them properly. Each and every battery cell needs to be inspected so as to make certain that the fill level is topped up to the regulated amount.
An oil change is the next step to drain all the oil out of the machinery and then change the filters. The fuel filters, hydraulic filter and the transmission filter should be replaced regularly. Prior to fitting them, be sure to write the date on the new filters by utilizing a permanent marker in order to keep track.
Once the oil change has been done and new filters have been fitted, visually inspect the drive axle from underneath the equipment. Be certain to grease the axle if there is any grease fitting. Inspect the belts on the engine for any frays or cracks. If you find any, fix the problem accordingly. Then, check each and every other part of the equipment like the wheels. If any type of fault or concern is detected, be certain to address it immediately so as to make sure the machine is working at its safest and optimum levels.